Introducing the new Cargo Monster load carrying extension for recumbent trikes, bikes, and nonstandard upright bikes!
|
|
|
Bring home the groceries, haul boxes, do almost all your errands by bike! The Cargo Monster is unafraid of serious loads! Go to the hardware store for fencing and concrete- no problem! Tour cross country and neatly carry everything you need.
|
|
|
The Cargo Monster is a heavy duty redesign of the Xtracycle Free Radical cargo concept for use with a much wider range of bicycles -- including recumbent trikes, recumbent bikes, folders, and other unusual bikes. The design uses a common main frame with interchangeable forward connection beams for 20" and 26" wheeled bikes and trikes. The main frame of the Cargo Monster attaches at the dropouts of your bike or trike, right where your rear wheel used to be. A CNC machined clamp attaches to the main tube ahead of the chainstays. As needed, an adapter plate, made specifically for your bike or trike, connects the end of the forward beam to the clamp on the frame.
We are developing kits for recumbent trikes first and following up with kits for unusual upright and recumbent bikes. Recumbent trikes are an awesome cargo platform:
Those are 7 foot (2m) fence posts. Got a few stares coming home, otherwise, no problem!
The Cargo Monster features:
Full Chrome Moly tubing construction
100% Xtracycle compatability
Custom laser cut lugs
203mm disk brake tab
Fender mounts
Built in Idler mounts
20 and 26" wheel capability- and you can put a 26" wheel on a 20" trike if you want...
Cable extender, cable, and extra housing for rear derailleur included
Model specific clamps and adapters make everything very sturdy and easy to attach
Motor mounts for electric mid drive
Fits standard 135mm rear dropout spacing
Click over to our webshop and you can order your Cargo Monster online. If you have questions, check out our Frequently Asked Questions page.
|
Big Loads- Check! Bulky or heavy, the Cargo Monster takes it all |
 |
|
Black powder coat, all stainless hardware. Compatible with all Xtracycle Racks, Bags, and Cargo Platforms
|
 |
|
Kits available now for most Catrikes, WizWheelz, and Greenspeeds. Kits in development for ICE, Sun, Performer, and Actionbent trikes, to be followed by kits for upright and recumbent bikes
|
 |
|
All new design is Xtracycle compatible, recumbent specific Everything bolts right on
|
 |
|
Versatile Design to fit a wide variety of bikes and trikes More adapter plates and frame clamps to come!
|
 |
|
Accepts the full range of Xtracycle Accessories Xtracycle Pannier Kit with optional Top Deck shown
|
 |
|
The standard Xtracycle Long Tail Kit All kinds of load carrying possibilities with this basic kit
|
 |
|
Lots of strapping and platform options Versatile enough to carry most anything |
 |
|
Ladders, too! This one's a 6 foot stepladder
|
 |
|
Made in Portland, OR USA Custom laser cut lugs
|
 |
|
Model Specific Mounts and Adapters Very sturdy and easy to attach
|
 |
|
All new, torsionally stiffened frame Oversize tubes, super stiff design for trikes puts load lower for better handling
|
 |
|
Super Stout Dropout
Attachments Bolts into dropouts with
M10 stainless bolts and NyLock nuts.
|
 |
Xtracycle, who started it all
A nice article with additional photos on BikePortland.org
BentRiderOnline announcement. Yes, Bryan, you can haz Cargo Monster!
The Recumbent Blog gets into it
Our Cargo Monster Frequently Asked Questions page
