Scroll down to see the Photo Gallery
All Standard Accessory mounts now have grooved attachment tubes to securely hold the O-ring attachment for DiNotte Lights.

If you are unsure of the tubing diameter where you wish to put your Accessory Mount, click here to download a handy Tubing Measurement Tool to measure all common tubing sizes from 1/2in to 60mm.

Scroll down to the Photo Gallery for lots of mounting ideas!

Multi-purpose Accessory Mount
	Quantity in Basket: none Code: accmt Price: $34.00 Shipping Weight: 0.25 pounds
	Post or Tube Diameter: 1 3/8" 1 1/4" 1 1/8" 1" 7/8" 3/4" 5/8" 1/2" Choose arm length: 50mm x 75mm 75mm x 100mm 100mm x 100mm
	Quantity:
This amazingly strong and light weight mount (53 grams for the 50x75mm version). And Strong! You could lift your bike by the mount, not that this is its intended purpose. Center up your light on a deraileur post and away from most of the foot induced strobe effect from your light. Mount a computer on your bike or trike where you choose for best visibility. Use on any vertical post between 1/2" and 1 1/4 inches. The angle can be altered by flipping the mount upside down or rotating the mounting brackets closer or farther apart. The uses for this bracket are unlimited. Every time we play with it we find one more use. We are using it on recumbents, folding bikes, and both threaded and threadless stem diamond frame bikes. The really cool thing is that most front end accessories need a horizontal mount and most items end up on your handlebars- which then interferes with hand position, or, like on a high racer, lights etc. end up in your line of sight over the bars. This mount is perfect for high racers or short wheelbase recumbents- and as you can see below, uprights, too! The TerraCycle Multi Purpose Mount allows more adaptability than any other mount. Two brackets can even be staggered one above the other for multiple lights! We find this to be one of the most unique and useful mounts we have ever seen. Many customers are coming back for 2, 3, 4, 5- even 6 more mounts! (To all you multiple mount buyers- and in fact everyone- we'd LOVE to know how you're using them!) A note on arm lengths: for most recumbent applications, we recommend the 50x75mm arm combination. If you want more room, or to get things further away from the frame, go for the 75x100mm version.On upright bicyle stem mounting applications, we recommend the 75x100mm or 100x100mm arm combinations for maximum versatility. If you are mounting on a fork blade, we recommend the 50x75mm setup. For some Highracer Recumbents, the 100x100mm combination allows you to put a light down low and right in front of the BB shell. Accessory Mount Photo Gallery Accessory Mount with 50x75mm Arms 100mm, 75mm, and 50mm Arms Mount shown with optional Side Extender Mount. The Side Extender adds 15mm to the 30mm main mount; a second can be added, for extensions on both sides. Catrike with Dual Mount. Note everything is down out of your line of sight. On things like trikes where you look out over the front deraileur tube, this really improves the view. Catrike with Mounts Front and Back WizWheelz with Mounts Front and Back Rear view of WizWheelz with Computer in back and Light in front Bacchetta CarbonAero with 75mmX100mm Mount Arms. Note rear attachment of lower arm, to increase triangulation Bachetta CarbonAero with 100x100mm Mount Arms. Note rear attachment of lower arm Fork blade and fender eyelet mounting. Note that there are two spacers (removed from both the supplied Cateye mounting clamps) on the fender eyelet, and no spacer in the upper Cateye clamp. This lets the lower arm clear the fork blade, and moves the Mount outboard a bit. Mid fork blade mount . Cateye clamps as supplied (with spacers inserted). Note this installation shows that you can put the mounting bolts ahead of or behind the tube you attach to. These continuously curving bars didn't have any place to mount anything. No problem- attach to the stem! Again, if you don't have room on the bars, or don't want to clutter your bars, you can mount to the stem and have a light under the bars. A note to those using generator type lights- a mount is now available for your lights. See the photo of the Randonneuring setup further down this page. Volae with 50x75mm mounting arms Rear view of Volae with 50x75mm mounting arms Volae with 100x100mm mounting arms. Note the lower arm is mounted to the rear of the deraileur tube to improve triagulation (widen the base). Rear view of Volae with 100x100mm arms. Note how low and forward the light is. Rear view of light mount on recumbent front deraileur post Rear view showing second light on optional extender mount Computer mounted on the rear of a handlebar mast. This gets the computer off the handlebars for better visibility. Details of the rear facing mast mount. Note that the upper arm is mounted forward of the mast to bring the computer closer to the mast. Another interesting mounting- at the top of a mast, under the handlebars. Depending on your knee clearance, this can be a nice place for a light, and clears the handlebars for better visibility. Rear view of light at the top of the mast. Another Mast mounting, this one on a Bike Friday. This clears up the bars and doubles as a cable manager. Another bike with continuously curving bars. This bike never had a satisfactory light mounting until now. Randonneuring setup showing a Shimano generator light and a Euro style Union light. If you have a Euro style light (B&M, Inoled, Lumotec, E6, Union, etc.) be sure to scroll down and check out the Tab Mount for Euro style Lights. This add on tab lets you easily attach classic type lights in addition to handlebar mount type lights. Special mounting for DiNotte lights- the O ring snaps into grooves for greater stability. Due to strong customer demand, we have made this feature standard on all mounts. The Easy Racers/LWB light mount. Mounts up to two full sized lights over the wheel and two more smaller lights lower down. Also designed to provide additional support for the front of your fender. Fully adjustable to fit any LWB bike. Shipping the first week of January 2007. See related items below.

Related Item(s)

Name Image Price   Accessory Mount Extender Kit $10.00 Accessory/Light Mount for Long Wheelbase Bikes $67.00 Accessory Mount Clamps $8.00 Tab Mount for Euro style Lights $5.00